{"id":13163,"date":"2022-06-24T11:00:00","date_gmt":"2022-06-24T03:00:00","guid":{"rendered":"https:\/\/rewa.tech\/xiaomi-mi-10-does-not-display-issue-repair\/"},"modified":"2024-05-10T14:46:11","modified_gmt":"2024-05-10T06:46:11","slug":"xiaomi-mi-10-does-not-display-issue-repair","status":"publish","type":"post","link":"https:\/\/rewa.tech\/de\/xiaomi-mi-10-does-not-display-issue-repair\/","title":{"rendered":"Xiaomi Mi 10 wird nicht angezeigt Problem Reparatur"},"content":{"rendered":"<p>Xiaomi Mi 10 wird nicht angezeigt Problem Reparatur<\/p>\n<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/Mi_10_5G.png\" alt=\"\" width=\"216\" height=\"152\" title=\"\"><\/p>\n<p><strong>Modell:<\/strong> Xiaomi Mi 10 5G<\/p>\n<p><strong>Angek\u00fcndigt:<\/strong> 2020, Februar 13<\/p>\n<\/p>\n<h2>Defekt-Ph\u00e4nomen<\/h2>\n<p>The screen does not display after the phone is dropped, but there was still a sound when a call is received.<\/p>\n<p>At first, the client thought that the screen was broken, then went to Xiaomi&#8217;s official after-sales service to ask for help, and replace a new screen the issue still remains the same. It should be the motherboard with the problem.<\/p>\n<p>Because the replacement cost of Xiaomi&#8217;s official motherboard is too high, so send it to a repair shop to repair, but the issue cannot be fixed, then send it to us to repair.<\/p>\n<\/p>\n<h2>Fehlersuche<\/h2>\n<p>First, let&#8217;s disassemble the phone and take out the motherboard<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/01__First__lets_disassemble_the_phone_and_take_out_the_motherboard.png\" alt=\"\" title=\"\"><\/p>\n<p>The issue is no display, so we focus on checking the parts relative to the display function. Checking under the microscope, find some problems<\/p>\n<ol>\n<li>The display connector has been reflowed by the previous repair technician<\/li>\n<li>A small component is missing, and the pad on the PCB was dug with a hole<\/li>\n<\/ol>\n<p><img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/02__The_display_connector_has_been_reflowed_by_previous_repair_technician.png\" alt=\"\" width=\"603\" height=\"922\" title=\"\"><\/p>\n<\/p>\n<p>Take a good motherboard for comparison, the missing component is a small CR6400.&nbsp;<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/04__CR6400.png\" width=\"1218\" height=\"874\" alt=\"\" title=\"\"><\/p>\n<p>It&#8217;s on the LCD_RESET_N signal, and when measuring the diode value on the good motherboard<\/p>\n<ul>\n<li>the&nbsp;pin 20# of J6400 is around 400<\/li>\n<li>the CR6400 side which is connected with J6400 is also around 400<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/Mi_10_Does_Not_Display.png\" alt=\"Mi 10 Does Not Display\" width=\"791\" height=\"1202\" title=\"\"><img decoding=\"async\" src=\"https:\/\/io.dropinblog.com\/Mi 10 Does Not Display\" alt=\"\" title=\"\"><\/p>\n<p>Measure the diode value on the pin 20# of J6400 on the damaged motherboard,&nbsp;<span style=\"color: #000000;\">it&#8217;s OL!<\/span><\/p>\n<p><span style=\"color: #008000;\">So the issue should be the inner line between the&nbsp;J6400 pin20 and CR6400 is broken. We need to jump a wire to fix the issue.<\/span><\/p>\n<p><span style=\"color: #ff6600;\"><span style=\"color: #000000;\"><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/06__Need_to_jump_a_wire_to_fix_the_problem.png\" alt=\"\" title=\"\"><\/span><\/span><\/p>\n<\/p>\n<h2>Reparatur-Prozess<\/h2>\n<p><strong>Jump wire between pin20 of J6400 and CR6400<\/strong><\/p>\n<\/p>\n<p>Measure the diode value on the dug pad of CR6400, it&#8217;s grounded. So we need to scratch out the PCB paint to find out the inner line.<\/p>\n<ol>\n<li>Remove the connector and small components around CR6400<\/li>\n<\/ol>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/07__remove_the_connector_and_small_components_around_CR6400.png\" alt=\"\" title=\"\"><\/p>\n<\/p>\n<p>2. clean the PCB pads under the J6400 with solder wick<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/08__clean_J6400.png\" alt=\"\" title=\"\"><\/p>\n<\/p>\n<p>3. Scratch out the inner rail which connected with CR6400 slightly<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/09__See_the_inner_line.png\" alt=\"\" title=\"\"><\/p>\n<p>keep scratching a little bit&#8230;<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/10__Scratch_out_the_inner_rail_and_measure_the_diode_value_with_the_multimeter__the_measured_diode_value_is_400.png\" alt=\"\" width=\"595\" height=\"657\" title=\"\"><\/p>\n<p>When scratched out the inner rail then measured the diode value with the multimeter, the measured diode value is 400.<\/p>\n<p>The diode value is OK!<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/11__400_diode.png\" alt=\"\" width=\"599\" height=\"699\" title=\"\"><\/p>\n<\/p>\n<p>4. Jump wire between CR6400 and pin20 of J6400<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/12__Jump_wire_between.png\" alt=\"\" title=\"\"><\/p>\n<p><em>You can visit the <a href=\"https:\/\/academy.rewa.tech\/courses\/handwork-course\">REWA Academy handwork course<\/a> to learn the detailed jump wire process.<\/em><\/p>\n<p><em><\/em><\/p>\n<p>5. After jumping the wire, measure the diode value on J6400 pin 20, it also shows 400. The jump wire is finished, then we can solder back the display connector J6400.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/J6400_solder_back.png\" width=\"595\" height=\"759\" alt=\"\" title=\"\"><\/p>\n<\/p>\n<p>6. Clean the motherboard and assemble the phone to have a test. The phone can display normally, and all the other functions also work fine.<\/p>\n<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2024\/04\/13__Display_back_to_normal.png\" alt=\"\" title=\"\"><\/p>\n<h2>Zusammenfassung<\/h2>\n<p>The no display issue is caused by the display RESET signal inner line being broken. Jump a wire to fix the issue!<\/p><\/p>","protected":false},"excerpt":{"rendered":"<p>Xiaomi Mi 10 Does Not Display Issue Repair Model: Xiaomi Mi 10 5G Announced: 2020, February 13 Defect Phenomenon The screen does not display after the phone is dropped, but there was still a sound when a call is received. At first, the client thought that the screen was broken, then went to Xiaomi&#8217;s official [&hellip;]<\/p>\n","protected":false},"author":10,"featured_media":13164,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[781],"tags":[],"class_list":["post-13163","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-android-repair-knowledge"],"_links":{"self":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts\/13163","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/comments?post=13163"}],"version-history":[{"count":0,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts\/13163\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/media\/13164"}],"wp:attachment":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/media?parent=13163"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/categories?post=13163"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/tags?post=13163"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}