{"id":42305,"date":"2026-11-09T11:34:31","date_gmt":"2026-11-09T03:34:31","guid":{"rendered":"https:\/\/rewa.tech\/?p=42305"},"modified":"2026-11-09T11:34:34","modified_gmt":"2026-11-09T03:34:34","slug":"iphone-18-pro-front-glass-refurbishment","status":"publish","type":"post","link":"https:\/\/rewa.tech\/de\/iphone-18-pro-front-glass-refurbishment\/","title":{"rendered":"iPhone 18 Pro Front Glass Replacement: Step-by-Step Laser Refurbishment Guide"},"content":{"rendered":"<p class=\"wp-block-paragraph\"><strong>Key Technical Takeaways<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Critical Repair Risk:<\/strong> Touching the OLED layer during OCA residue removal can destroy the panel. The glue remover rod must only roll up adhesive, never contact the display directly.<\/li>\n\n\n\n<li><strong>Tools &amp; Heat:<\/strong> UV cold-light laser machine for OCA softening, 90\u00b0C heated vacuum separator, 0.028mm cutting wire, electric glue remover, laminating machine, and bubble remover.<\/li>\n\n\n\n<li><strong>Key Technique:<\/strong> Retain the original screen bezel, manually align the new front glass because no dedicated mold is available, and use de-bubbling to eliminate lamination voids.<\/li>\n\n\n\n<li><strong>Verification Check:<\/strong> Connect the display to the phone after glass separation and again after final lamination to confirm the panel survives and touch works normally.<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"iPhone 18 Pro Front Glass Replacement | A New Repair Challenge?\" width=\"800\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/eb0F6nOX0y0?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">During <a href=\"https:\/\/rewa.tech\/de\/iphone-18-pro-demontage\/\" data-type=\"post\" data-id=\"42224\">Abri\u00df<\/a> comparisons, the pixel density difference between the under-display infrared camera zone and the surrounding display is visible. That raises a practical refurbishing question: does this new under-display sensor arrangement make glass-only front glass refurbishment more difficult? This guide follows a complete glass refurbishment attempt using a UV cold-light laser, heated vacuum separation, OCA cleanup, and new glass lamination.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Rather than replacing the whole display assembly, glass-only refurbishment saves the original OLED panel and the original screen bezel. The process works by softening the optically clear adhesive, or OCA, between the cover glass and the OLED assembly. A laser machine with a UV cold-light source is used to selectively soften the OCA without harming the display. The screen is then placed onto a heated separator at 90\u00b0C with vacuum suction, and a fine cutting wire separates the cover glass. After cleaning the remaining adhesive, a new front glass is manually aligned and laminated, then transferred to a bubble remover.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This procedure requires a clean workbench, ESD-safe handling, precision hand tools, and experience with fragile OLED panels. <\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42306\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss-1024x576.webp\" alt=\"Desktop phone repair setup featuring a UV laser machine, lamination machine, and screen separator on a workbench\" class=\"wp-image-42306\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/refox-machines-to-repair-front-glasss.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42333\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement-1024x576.webp\" alt=\"Workbench displaying phone repair tools, an iPhone, replacement front glass with OCA, glue remover, and cutting wire\" class=\"wp-image-42333\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/tools-parts-to-front-glass-replacement.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Required Tools, Parts &amp; Materials<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Pentalobe-Schraubendreher<\/li>\n\n\n\n<li>Protective sticker or film for the front camera area<\/li>\n\n\n\n<li><a href=\"https:\/\/shop.rewa.tech\/detail\/refox-promat-rs30-esd-repair-heating-pad.html\" data-type=\"link\" data-id=\"https:\/\/shop.rewa.tech\/detail\/refox-promat-rs30-esd-repair-heating-pad.html\">Phone repair heating pad<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/shop.rewa.tech\/detail\/refox-rs50-mobile-phone-opener-clamp-fixture.html\" data-type=\"link\" data-id=\"https:\/\/shop.rewa.tech\/detail\/refox-rs50-mobile-phone-opener-clamp-fixture.html\">Mobile phone opener &amp; clamp fixture<\/a><\/li>\n\n\n\n<li>Alcohol<\/li>\n\n\n\n<li>UV cold-light laser machine<\/li>\n\n\n\n<li>Screen separator with vacuum suction and 90\u00b0C heating<\/li>\n\n\n\n<li>Razor blade<\/li>\n\n\n\n<li>0,028mm Schneiddraht<\/li>\n\n\n\n<li>Elektrischer Klebstoffentferner<\/li>\n\n\n\n<li>PCB-Reiniger<\/li>\n\n\n\n<li><a href=\"https:\/\/shop.rewa.tech\/detail\/repart-iphone-front-glass-replacement-with-oca.html\">New front glass cover<\/a><\/li>\n\n\n\n<li>Alignment fixture or tray<\/li>\n\n\n\n<li><a href=\"https:\/\/shop.rewa.tech\/detail\/refox-rk10-uv-laser-marking-machine.html\">Laminating &amp; bubble remover machine<\/a> <\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Pre-Repair Safety &amp; Device Isolation<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Disconnect the battery connector before working on the display assembly. The video opens the display, then disconnects the screen flex cable, front sensor flex cable, and battery connector.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Since the iPhone 18 Pro has an under-display infrared camera, keeping that zone protected during adhesive removal and lamination is important.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The front camera flex cable is removed with a few drops of alcohol before the laser step. This prevents the flex cable from being damaged during laser processing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">During glue removal, the electric glue remover rod must not touch the OLED layer. Contact with the fragile display can cause permanent damage.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Step-by-Step Front Glass Refurbishment<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Step 1: Baseline Screen Verification and Display Opening<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Test the screen before disassembly. Remove the bottom pentalobe screws and open the display assembly.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws-1024x576.webp\" alt=\"Removing the bottom pentalobe screws from iPhone 18 pro using a precision screwdriver\" class=\"wp-image-42309\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/unscrew-18-pro-bottom-pentalobe-screws.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 2: Protect the Front Camera and Disconnect Internal Flex Cables<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Apply a protective sticker over the front camera area. Disconnect the screen flex cable, front sensor flex cable, and battery connector.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-2 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42312\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area-1024x576.webp\" alt=\"Hand holding open a phone display panel with a protective sticker applied over the front camera area\" class=\"wp-image-42312\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/applying-a-protective-sticker-over-the-front-camera-area.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42314\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera-1024x576.webp\" alt=\"Technician using tweezers to place a red protective sticker over the front camera sensor inside an opened phone frame\" class=\"wp-image-42314\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/apply-protective-sticker-over-front-camera.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 3: Remove the Front Camera Flex with Alcohol<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Apply a few drops of alcohol to remove the front camera flex cable. This step protects the flex cable from damage during the laser processing that follows.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-3 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42316\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable-1024x576.webp\" alt=\"Precision tweezers lifting the front camera flex cable connector from the top edge of the display assembly\" class=\"wp-image-42316\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/remove-18-pro-front-camera-flex-cable.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42313\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector-1024x576.webp\" alt=\"Tweezers gently lifting and peeling the front camera flex cable away from the top edge of the display assembly\" class=\"wp-image-42313\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/disconnecting-the-screen-flex-front-sensor-flex-and-battery-connector.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 4: Laser Template Alignment and UV OCA Softening<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Align the screen by its corners and place it onto the laser machine. Select the preset drawing template; in the source this is identified as an iPhone 17 Pro preset. The laser does not align precisely with the screen edges automatically, so adjustments are needed before the infrared preview. Adjust until the red positioning line aligns perfectly with the screen perimeter, then start the machine.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine-1024x576.webp\" alt=\"A hand placing the screen assembly onto the alignment stage inside a laser machine\" class=\"wp-image-42318\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/align-screen-onto-laser-machine.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The laser machine uses a UV cold-light source to precisely soften the OCA without harming the display. After laser treatment, the screen edge shows slight frosting.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing-1024x576.webp\" alt=\"Smartphone screen secured in a fixture inside a laser machine during UV softening\" class=\"wp-image-42319\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/starting-uv-cold-light-laser-processing.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 5: Heated Vacuum Glass Separation<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Place the screen onto the screen separator, heat it to 90\u00b0C, and turn on the vacuum suction. Because this refurbishment keeps the original screen bezel, a razor blade is used to cut an entry point first. Insert a 0.028mm cutting wire into the opening and pull it back and forth to separate the glass cover from the OLED display.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-4 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42320\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction-1024x576.webp\" alt=\"Inserting a razor blade into the corner of the display to create an entry point between the cover glass and frame\" class=\"wp-image-42320\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/placing-the-screen-on-the-heated-separator-with-vacuum-suction.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42321\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation-1024x576.webp\" alt=\"Technician using a fine steel wire to separate the cover glass from a phone screen on a heated vacuum separator pad\" class=\"wp-image-42321\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/iphone-18-pro-screen-glass-separation.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 6: Post-Separation Functional Check<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">After the glass cover is separated, connect the display assembly to the phone for testing. The panel shows no damage and touch works properly.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions-1024x576.webp\" alt=\"Hand holding the separated OLED display connected to an iPhone, showing a functional screen to test touch and visual output\" class=\"wp-image-42322\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/connect-screen-for-texting-functions.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 7: OCA and Bezel Adhesive Removal<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Install the alignment fixture on the front, place the screen back on it, and turn on the vacuum suction again. This allows close inspection of the adhesive removal condition.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Because the original screen frame bracket is retained, both the OCA glue residue and the bezel adhesive must be cleaned. Use an electric glue remover to clean residue from the display. Be careful that the glue removing rod does not touch the OLED layer directly. Only gently roll up the OCA residue; touching the fragile display can cause damage.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue-1024x576.webp\" alt=\"Hand holding an electric glue remover rod to clean adhesive residue from the screen edge\" class=\"wp-image-42324\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/use-electric-glue-remover-roll-up-oca-residue.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 8: Frame Adhesive Cleaning and PCB Cleaner<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Next, process the frame adhesive with PCB cleaner. Thorough cleaning prevents bubbles from recurring after lamination.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner-1024x576.webp\" alt=\"Hands wiping a detached OLED display panel with a small white cleaning pad on a work mat\" class=\"wp-image-42326\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/processing-the-frame-adhesive-and-cleaning-the-screen-with-pcb-cleaner.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 9: New Glass Manual Alignment and Lamination<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Take out the new front glass. Use pull tabs to peel off the protective film on the new glass cover. Since this is a new model and there is no dedicated alignment mold, manual alignment is required. Place the screen on the tray and put it into the laminating machine for lamination.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-5 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42328\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs-1024x576.webp\" alt=\"Hands manually aligning the phone display panel onto the new front glass cover\" class=\"wp-image-42328\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/peeling-the-film-from-the-new-front-glass-using-pull-tabs.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42329\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray-1024x576.webp\" alt=\"Inserting the tray with the aligned display assembly into the laminating machine chamber\" class=\"wp-image-42329\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/place-screen-on-lamination-machine-tray.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42330\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination-1024x576.webp\" alt=\"A hand sliding a tray holding the display assembly into a laminating machine\" class=\"wp-image-42330\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/complete-the-lamination.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Step 10: De-Bubbling and Final Verification<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Once lamination is complete, quickly transfer the screen to the bubbling chamber. After de-bubbling, the glass cover and screen are seamlessly laminated with zero bubbles. Light up the screen for testing again; touch functions normally and the glass lamination result is excellent.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-6 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42334\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination-1024x576.webp\" alt=\"Hands placing the laminated screen assembly into the chamber of a bubble remover machine\" class=\"wp-image-42334\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/take-out-after-lamination.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" data-id=\"42335\" src=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination-1024x576.webp\" alt=\"test functions after complete the replacement\" class=\"wp-image-42335\" title=\"\" srcset=\"https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination-1024x576.webp 1024w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination-300x169.webp 300w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination-768x432.webp 768w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination-18x10.webp 18w, https:\/\/rewa.tech\/wp-content\/uploads\/2026\/11\/test-functions-after-lamination.webp 1280w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Tips &amp; Tricks<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Because there is no pre-set drawing template, you need to manually confirm the infrared preview position when using the laser machine to prevent misalignment.<\/li>\n\n\n\n<li>When refurbishing the screen while retaining the original frame, use a blade to carefully locate the entry point between the display panel and the cover glass, allowing the cutting wire to slide in for separation. <\/li>\n\n\n\n<li>When refurbishing while retaining the bezel, make sure to clean off the frame adhesive beforehand. <\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Technical Conclusion &amp; Quality Control Checklist<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The demonstration of iPhone 18 Pro Front Glass Replacement shows that the under-display infrared camera does not increase the difficulty of front glass refurbishment on the iPhone 18 Pro when the correct precautions are followed. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The key is to protect the remove the front camera flex cable before laser processing. The UV cold-light laser selectively softens the OCA without damaging the OLED, and the heated vacuum separator with the 0.028mm cutting wire cleanly separates the cover glass.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Because the original bezel is retained, the most demanding bench work is adhesive removal. The electric glue remover must never touch the OLED layer. Thorough OCA and frame adhesive cleaning prevents bubble recurrence after lamination. Manual alignment of the new glass must be performed carefully because no dedicated mold is available for this model at the time of the video. Transferring the laminated screen quickly to the bubble remover produces a seamless, zero-bubble result.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Post-Repair Quality Control Checklist<\/strong><\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Confirm touch response across the full display after glass separation and after final de-bubbling.<\/li>\n\n\n\n<li>Inspect the lamination under strong light for bubbles, haze, or adhesive voids.<\/li>\n\n\n\n<li>Ensure the new glass sits flat against the retained bezel with no raised edges.<\/li>\n\n\n\n<li>Verify no OCA residue remains along the display or frame adhesive surfaces.<\/li>\n\n\n\n<li>Reconnect the battery and all flex cables only after the laminated assembly is clean and dry.<\/li>\n\n\n\n<li>Perform a final front camera and sensor function check after reassembly.<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Key Technical Takeaways During teardown comparisons, the pixel density difference between the under-display infrared camera zone and the surrounding display is visible. That raises a practical refurbishing question: does this new under-display sensor arrangement make glass-only front glass refurbishment more difficult? This guide follows a complete glass refurbishment attempt using a UV cold-light laser, heated [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":42340,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"wpai_generated_summary":"","fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[16,5,13,158],"tags":[],"class_list":["post-42305","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-guide","category-how-to","category-iphone-guide"],"_links":{"self":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts\/42305","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/comments?post=42305"}],"version-history":[{"count":3,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts\/42305\/revisions"}],"predecessor-version":[{"id":42384,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/posts\/42305\/revisions\/42384"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/media\/42340"}],"wp:attachment":[{"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/media?parent=42305"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/categories?post=42305"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rewa.tech\/de\/wp-json\/wp\/v2\/tags?post=42305"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}