{"id":1911,"date":"2016-06-14T00:00:00","date_gmt":"2016-06-14T00:00:00","guid":{"rendered":"http:\/\/192.168.2.19:8666\/?p=1"},"modified":"2023-12-19T15:24:26","modified_gmt":"2023-12-19T07:24:26","slug":"hot-iphone-parts-testing-kit-diy-by-rewa","status":"publish","type":"post","link":"https:\/\/rewa.tech\/it\/hot-iphone-parts-testing-kit-diy-by-rewa\/","title":{"rendered":"Hot iPhone Parts Testing Kit – DIY by REWA"},"content":{"rendered":"

\"\"<\/p>\n

iPhone Parts\/<\/p>\n

Small Components Testing Kit \/<\/p>\n

Testing Tool Set \/<\/p>\n

Testing Machine \/Testing Box for iPhone 4, 4s, 5, 5c, 5s, 6, 6 plus, 6s, 6s plus Repair and Test<\/p>\n

Prompt caldo:<\/strong><\/h2>\n

1) This mobile phone parts testing kit does not need an extra dry battery to be supplied. They should use their included batteries.<\/p>\n

2) This testing kit comes with 2 buttons, one is in the top right corner of the control panel – power button, the other one is at the bottom – reset button. \u201cPower button\u201d is the substitute of iPhone power switch button and \u201creset button\u201d can prevent the logic board installed in the testing kit from being burned out when the phone crashes or when we encounter any emergency due to mishandling in the process of testing.<\/p>\n

3) At the top of this testing machine, we specially install two power interface to help with the power supply in case of battery runs\u00a0out or runs into inactivate state.<\/p>\n

Brief introduction<\/h3>\n

This Hot iPhone Parts Testing Kit aims at testing 4 iPhone small components – power switch volume control flex cable, rear-facing camera flex cable ribbon, front-facing camera ribbon cable and dock connector charging port flat cable. And it\u2019s completely customized by REWA Technical Engineers and specially designed for mobile phone repair shops\/stores<\/a> and cell phone spare parts distributors. Next we\u2019ll illustrate how this iPhone parts testing box works.<\/p>\n

Test del cavo flessibile della porta di ricarica<\/strong><\/p>\n

\"\"<\/p>\n

1) Install dock connector charging port flex cable (tail plug cable) after starting up. Connect the USB data cable to the computer, we can get device information by \u201ciTools\u201d software and charge indicator icon is lit up.<\/p>\n

\"\"<\/p>\n

2) Install charging port dock connector flex ribbon cable(tail plug cable) after power on. Connect the USB data cable to the computer, similarly we can get device information through \u201ciTools\u201d.<\/p>\n

\"\"<\/p>\n

3) Plug earphones and manage to do some sound recording and playing and adjust volume up\/down in the course of record and play.<\/p>\n

\"\"<\/p>\n

4) Install home button flex cable, press home button to return to the main menu.<\/p>\n

Test della telecamera posteriore<\/strong><\/p>\n

\"\"<\/p>\n

Install rear-facing camera\/back camera on the machine, enter into camera mode, adjust focus and take a picture, then check the picture.<\/p>\n

Test della fotocamera frontale<\/strong><\/p>\n

\"\"<\/p>\n

1) Install front facing camera \/ secondary camera, enter into front camera mode and make a video for 6 seconds, then play it through the buzzer\/loudspeaker<\/p>\n

\"\"<\/p>\n

2) Enter into record mode and play a record, cover\u00a0and\u00a0uncover the proximity sensor area to see if the screens go black or are\u00a0lit up.<\/p>\n

Interruttore di alimentazione Volume Test del cavo flessibile<\/strong><\/p>\n

\"\"<\/p>\n

1) Install power switch on-off volume control flex cable ribbon (audio cable), press the power switch button to check if the screen can be lit up.<\/p>\n

\"\"<\/p>\n

2) Test the volume up\/down button, adjust mute button, the vibrator motor and loudspeaker\/buzzer responding accordingly.<\/p>\n

\"\"<\/p>\n

3) Enter into flashlight mode, flashlight lighting. So why should I use this iPhone parts testing kits? Firstly, it obviously will save you a lot of time. Let\u2019s assume you are a mobile phone parts distributor<\/a> or repair shop owner and have a number of flex cables mentioned above to be tested before reselling them to your customers or used to repair cellular phones. This toolkit is easy enough to test them all in bulk in a more efficient way and save time when you installed faulty parts and have your customers waiting twice the as long\u00a0time. Secondly, it can reduce the chances of connector failure to the motherboard. Without using this phone parts testing tool, you will be burning through logic boards faster. You can expect the motherboard to fail after just a few hundred connections if you connect those flex cables to logic board directly. When encountered the connection failure, we just need to replace the corresponding extended flex cables. Last but not least, applying this toolset in your working will make it absolutely possible to keep the logic board closed when doing phone parts testing. Want to order our products? Please go to shop.rewa.tech<\/a> to get. Each product has shown the prices, shipping fees as well.<\/p>\n

Any questions please contact service@rewa.tech<\/a><\/p>","protected":false},"excerpt":{"rendered":"

iPhone Parts\/ Small Components Testing Kit \/ Testing Tool Set \/ Testing Machine \/Testing Box for iPhone 4, 4s, 5, 5c, 5s, 6, 6 plus, 6s, 6s plus Repair and Test Warm Prompt: 1) This mobile phone parts testing kit does not need an extra dry battery to be supplied. They should use their included […]<\/p>\n","protected":false},"author":1,"featured_media":2466,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"fifu_image_url":"https:\/\/s.rewa.tech\/image\/6096643c-fb95-4432-a283-5ecd7de3e08d-Hot-iPhone-Parts-Testing-Kit-DIY-by-REWA.jpg","fifu_image_alt":"","footnotes":""},"categories":[16],"tags":[765,702],"class_list":["post-1911","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-iphone-parts-testing-kit","tag-iphone-testing-kit"],"_links":{"self":[{"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/posts\/1911","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/comments?post=1911"}],"version-history":[{"count":0,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/posts\/1911\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/media\/2466"}],"wp:attachment":[{"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/media?parent=1911"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/categories?post=1911"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rewa.tech\/it\/wp-json\/wp\/v2\/tags?post=1911"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}