{"id":2177,"date":"2020-03-23T00:00:00","date_gmt":"2020-03-23T00:00:00","guid":{"rendered":"http:\/\/192.168.2.19:8666\/?p=1"},"modified":"2023-11-15T10:08:09","modified_gmt":"2023-11-15T02:08:09","slug":"iphone-x-wont-turn-quick-fix-thermal-imager-applied","status":"publish","type":"post","link":"https:\/\/rewa.tech\/it\/iphone-x-wont-turn-quick-fix-thermal-imager-applied\/","title":{"rendered":"iPhone X Won’t Turn On Quick Fix – Thermal Imager Applied"},"content":{"rendered":"

Rosin and the freeze spray are the two commonly\u00a0used\u00a0and\u00a0low-cost methods for faulty components locating\u00a0when repairing logic boards. Still, you can use the Thermal Imager instead for more efficient repair work if the two methods become time-consuming. Check our iPhone X quick fix repair guide\u00a0today and you will be surprised at how the Thermal Imager is used in iPhone X won\u2019t turn on repair.<\/p>\n

Problema<\/strong><\/h2>\n

Hold the power button to turn on the phone. The phone won\u2019t turn on. Take apart the phone and disconnect the battery. Remove the screen and take out the motherboard.<\/p>\n

\"Hold<\/p>\n

Diagnosi<\/strong><\/h2>\n

Let\u2019s check the boot current first.Connect the battery connector with the Power Supplier\u00a0and press power button on the Power Supplier. The system will then detect power button press. We can see that the current reading on the ammeter is larger than normal value.
\n\"Let\u2019s<\/p>\n

Touch the motherboard with one hand. The NAND flash chip and the area surrounding it are hot.\u00a0Which indicates that rails on the area might have shorted. Since there are so many components on the hot area, we can locate the faulty component with the help of the Thermal Imager.
\n\"Touch<\/p>\n

Imager termico<\/strong><\/a><\/h2>\n

\"Imager<\/p>\n

Caratteristiche<\/u><\/strong><\/h2>\n

This infrared thermal imager can detect the running temperature of motherboard chips, resistors\u00a0and capacitors\u00a0with the help of its built-in\u00a0PC intelligent analysis software and intelligent algorithm.<\/p>\n

This infrared thermal imager can help locate the current leakage\/short-circuit position quickly.<\/p>\n

It can greatly improve the efficiency and accuracy of your daily repair work with advanced technology.<\/p>\n

Features a lifting bracket with removable design, the thermal imager\u00a0is easy to assemble and carry.<\/p>\n

You can also replace the visible lens of the thermal imager\u00a0with electron-microscope<\/a> lens and make it\u00a0act as\u00a0an\u00a0electronic microscope.<\/p>\n

The bracket can be adjusted by the knot to reach the best observation distance.<\/p>\n

Put the motherboard under the Thermal Imager. Get the motherboard powered on. We can see clearly that C2647 is extremely hot. Judging by this, C2647 is probably damaged.<\/p>\n

\"Put<\/p>\n

Let\u2019s remove C2647 and run diode mode measurement of its bonding pad. The measured value is normal.\u00a0We can confirm now that C2647 is damaged.<\/p>\n

Risoluzione dei problemi<\/strong><\/h2>\n

Let\u2019s replace with a new capacitor and see how it works. Clean the bonding pad and apply some Paste Flux to the bonding pad. Then solder a new capacitor\u00a0onto the board.<\/p>\n

\"Let\u2019s<\/p>\n

Riassemblaggio e test<\/strong><\/h2>\n

Assemble the phone and test. The phone turns on normally.<\/p>\n

\"Assemble<\/p>\n

Strumenti utilizzati:<\/h2>\n
    \n
  • Multifunctional PCB Holder for iPhone X<\/a><\/li>\n
  • Stazione di rilavorazione con pistola ad aria calda<\/a><\/li>\n
  • Piattaforma integrata per la riparazione dei telefoni cellulari<\/a><\/li>\n
  • Microscopio elettronico<\/a><\/li>\n
  • Imager termico<\/a><\/li>\n
  • Kit di strumenti per lo smontaggio dell'iPhone<\/a><\/li>\n<\/ul>\n

    Potete anche visitare\u00a0Canale YouTube REWA<\/a>\u00a0to\u00a0check our video and learn how to fix iPhone X won’t turn on quickly and efficiently.<\/p>\n