REWA EU is now live – Stronger supply chain, Better local support. Learn More »
Accueil / iphone-repair-cases / Cracked iPhone XS Max Repair Case Sharing

Cracked iPhone XS Max Repair Case Sharing

Partager :

The cracked iPhone XS Max repair process

Phénomène de défaut

The phone was crushed by the car, and both the screen and back cover got seriously cracked.

Cracked Screen

The client almost throws it away, but finally still decides to have a try.

Disassemble the phone and check the parts and components inside, the battery also gets deformed, but luckily, the motherboard looks OK.

Inside

Change another screen to test, the phone can be booted, and the display, touch, camera, phone call, and Wi-Fi functions are also OK. What a miracle!

Then let’s remove the earpiece flex cable to the new screen to test the Face ID function.

Replace the Face ID module

After testing, it keeps reminding “move phone lower and move phone higher”. So we’ll need to fix the Face ID issue later.

Besides that, the battery also gets deformed seriously. So we also need to fix it.

Processus de réparation

For the battery, as it’s encrypted, if we change a 3rd party battery it will pop up an important message  “Unable To Verify Genuine Battery Warning”. So we can just flat the battery physically with a bottle. 

Flat the battery

This is how the battery looks like after flatting. Just like a new battery, Lol 🙂

After Flatting

Then let’s swap the battery, front camera, and rear camera to a new back cover.

Swap parts

(for the battery, we can apply a new battery adhesive sticker)

After that, let’s fix the Face ID issue!

Connect the Face ID module with the JC PRO1000S Multi-Function Programmer to test, it reminds the dot projector is fused. 

Programmer Face ID

Then we need to take out the dot project cable with the face ID holding fixture and hot air gun.

remove the dot projector

Then remove the little board on the dot projector cable

Then remove the MOSFET chip and short the pads. This is the common reason for the Face ID function failure.

After that, solder back the little board to a new flex cable and test with the multi-functional programmer again.

Dot projector function back to normal

The dot projector can be connected normally.

After that, apply XS Max Display Assembly Adhesive and assemble the phone to test. The Face ID function works normally, and the battery also works fine. 

Cracked iPhone XS Max Repair

Tips.

Visit REWA Youtube Channel or Académie REWA to learn the Face ID dot project repair process.

Partager :

Académie REWA

En tant qu'éducateur enthousiaste et expert en technologie mobile, la REWA Academy a consacré sa carrière à l'autonomisation des individus par le biais de l'enseignement technique. En se concentrant sur les réparations de téléphones portables, ils ont développé des cours complets en ligne et hors ligne à la REWA Academy. Leur expertise couvre un large éventail de domaines, notamment la formation à la réparation d'iPhone, le matériel et les logiciels téléphoniques, ainsi que les techniques de dépannage avancées. Par leurs écrits, ils cherchent à démystifier les complexités de la technologie mobile, en la rendant accessible et compréhensible tant pour les novices que pour les professionnels du secteur.
formation à la réparation de téléphones

Cours avancé de réparation de téléphone

Aspirez-vous à devenir un professionnel de la réparation de téléphones ? Si c'est le cas, visitez l'Académie REWA pour apprendre en profondeur la réparation de téléphones auprès d'experts de l'industrie.

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *