Analyse du démontage complet de l'écran OLED de l'iPhone X

As a new product of OLED combined with 3D Touch function, iPhone X screen has surprised all of us with its features. REWA LAB works with iPhone X screen teardown and presents its novelty, disassembly difficulties and structure analysis.

Laminating process of iPhone X OLED screen is much complicated than LCD screen. Laminate OLED with TP first, then OLED with 3D Touch. The whole process counts more than 15 procedures.

Démontage complet de l'écran OLED de l'iPhone X

Test sur écran

Test the iPhone X screen before tearing down. Run function test – Display; Touch; 3D Touch and Swipe-up. All going well.

Dépose de la lunette

Place the OLED Screen Assembly on the Heat Platform. Remove bezel slowly with Pry Piece and Glue Cleaner. Cut a plastic horn of the bezel with the blade if necessary and then remove bezel with Pry Piece and Glue Cleaner carefully. Be careful with flex cables when removing bezel in the flex cable area.

The Pry Piece accidentally damages flex cables when removing the bezel. Which may result in the abnormal display.

Test the screen again. Run function test – Display; Touch; 3D Touch and Swipe-up. Touch, 3D Touch, and Swipe-up work normally while there are two vertical lines on the display.

Séparation du verre

Placez l'ensemble écran OLED sur la plaque chauffante. Séparez la vitre de l'OLED à l'aide d'un fil de coupe. Nous travaillons avec un écran flexible OLED, faites donc attention lors de votre travail manuel.

Test again after separating. Run function test- Display; Touch; 3D Touch and Swipe-up. Touch, 3D Touch, and Swipe-up work normally while there are two vertical lines on the display.

Retrait de la colle

Le retrait de la colle pour l'écran de l'iPhone X peut s'effectuer à la main.

3D Touch Layer Removing

Different from Samsung smartphones, iPhone X has its 3D Touch module adhered to OLED backplane.

Different from all iPhone previous versions, the 3D Touch module of iPhone X is bonded to the OLED panel.

To fully analyze its structure, we take a disruptive disassembly of the 3D Touch module.

The 3D Touch and TP flex bonding are separated completely after the disassembly.

Let’s take a clear view of the whole structure of iPhone X OLED Screen.

For more details on iPhone X OLED Screen Total Teardown Analysis, please go to Chaîne YouTube de REWA.

Pièces et outils nécessaires

• 0.1mm Gold LCD Cutting Wire – 500M
• Manual LCD Separator – (Vacuum pump built-in) – Type 2