¿Cómo arreglar un iPhone 13 no se enciende?

iPhone 13 does not turn on repair

Fenómeno del defecto

Water-damaged iPhone 13 won’t turn on.

Proceso de resolución de problemas

First, disassemble the phone and check the motherboard, there is an obvious water damage sign on the motherboard.

Then connect the motherboard with a DC power supply, and use the tweezers to trigger and boot. There is a current leakage and the board cannot be booted.

So there must be something wrong with the motherboard, we need to put the motherboard on the heating platform and separate it.

Heating parameter setting

• Plataforma de calefacción temperature: 170℃
• Pistola de aire caliente temperature: 320-340℃

After separating, let’s check the cosmetic of the motherboard under the microscope. There are some corrosive found.

Then connect the motherboard with the DC power supply machine and check under the thermal image camera, as we can see there is a small component gets extremely hot.

Proceso de reparación

First, let’s deal with the corrosive part

Remove the corrosive chip with the hot air gun, solder paste, and tweezers

Then remove the short capacitor directly

(for the filter type capacitor, we can just remove it directly to avoid the possible damage to the PCB and surrounding components. If your soldering handwork is good enough, then you can also solder back a new one with the same specification)

After that, reball the chips and solder them back to the motherboard

The detailed soldering process refers Curso de manualidades de la Academia REWA

After soldering, clean the motherboard thoroughly with PCB cleaner, wiper clothes, and brush.

Then trigger with the DC power supply machine to test the booting process

Then boot current curve is normal, and the phone can be booted normally.

In the last step, let’s solder back the two layers of the motherboard and test the functions.

You can refer to Separación de la placa base del iPhone 13 Pro to view the detailed motherboard separation and bonding process.