Come risolvere il problema del surriscaldamento dell'iPhone 12 Pro

Have you encountered the dreaded “iPhone needs to cool down before you can use it” message on your iPhone 12 Pro? Overheating can cause your phone to become unstable, slow, or even shut down completely. This is a common problem faced by both technicians and phone users alike—but what causes it, and how can you fix it?

In this guide, we’ll take you through a real-life repair case involving an iPhone 12 Pro that experienced severe overheating due to a damaged earpiece flex cable. We’ll outline the repair steps, the tools used, and provide tips to help prevent similar damage in future repairs.

Symptoms of iPhone 12 Pro Overheating

• iPhone 12 Pro shows:
  “Temperature: iPhone needs to cool down before you can use it.”
• Heat is noticeably coming from the back cover
• Device shuts down or freezes due to high temperature

Processo di risoluzione dei problemi

1. Disassemble the iPhone 12 Pro and remove the motherboard.
2. Connect the motherboard to a DC power supply and trigger the boot process.
3. The phone boots normally and current readings are within normal range, which means the motherboard itself is not causing the iPhone 12 Pro overheating.

🔍 Diagnosi iniziale:

The issue likely originates from internal components other than the motherboard, such as flex cables, battery, or other connected modules.

Identifying the Real Culprit

• Upon close inspection, a crack was discovered in the cavo flessibile dell'auricolare. This component is often damaged during previous repairs like screen replacement, battery swaps, or logic board servicing.
• Over time, exposed copper wires on the flex cable can lead to short circuits, resulting in excessive heat generation.

💡 Tech Tip: Flex cables are thin and fragile. Improper folding or pinching can expose internal wiring, causing shorts that lead to iPhone 12 Pro overheating.

Repair Steps

Inspect the damage:

The crack on the earpiece flex cable was minor, so no need to replace it or jump wires.

Apply UV Solder Mask:

• Coat the damaged section of the flex cable with UV solder mask to insulate the exposed copper.
• Cure with a UV lamp for several minutes until hardened.

Reassemble the phone:

• Carefully reattach the motherboard.
• Pay extra attention to the earpiece flex cable during screen reassembly to avoid further damage.

Test finale

• Power on the device and run high-load tests such as video playback and gaming for 30+ minutes.
• ✅ Result: No overheating message, and the device remains cool and stable.

Strumenti e parti usate

Strumenti:

• Alimentazione CC
• UV Solder Mask
• Lampada di polimerizzazione UV
• Screwdrivers and disassembly tools (plastic pry tools, tweezers)
• Anti-static gloves and mat (optional but recommended)

Parti:

• Original iPhone 12 Pro earpiece flex cable (not replaced but inspected)
• UV Solder Mask (for insulation)

Conclusione:

This iPhone 12 Pro overheating issue wasn’t caused by a motherboard problem as initially suspected, but by a slightly damaged earpiece flex cable. By identifying and repairing the faulty flex using a UV mask instead of replacing the entire module, the issue was fully resolved.

When troubleshooting iPhone 12 Pro overheating problems, don’t overlook small internal components. Flex cables, dock connectors, or even a poorly executed battery replacement can all contribute to heating issues.

Lezioni apprese

• Not all problems come from the motherboard.
• Precision matters. When handling internal parts like flex cables, be meticulous to avoid causing additional damage.
• A good repair technician must have strong diagnostic skills and pay attention to small details.

Stay Ahead in Mobile Repair