REWA LAB has conducted a deeper teardown of iPhone X OLED screen Recently. After separation, you will find the differences between iPhone X display and the screens of previous iPhone models.
1. iPhone X display comes with different driver IC bonding technique. iPhone X applies COF, while previous iPhone applies COG.
2. iPhone X screen digitizer has its 3D touch module adhered to OLED backplate.
3. The 3D touch module of iPhone X is bonded to the OLED panel.
As a new product of OLED combined with 3D Touch function, iPhone X screen has surprised all of us with its features. REWA LAB works with iPhone X screen teardown and presents its novelty, disassembly difficulties and structure analysis. Laminating process of iPhone X OLED screen is much complicated than LCD screen. Laminate OLED with TP first, then OLED with 3D Touch. The whole process counts more than 15 procedures.
Smontaggio completo dello schermo OLED di iPhone X
Test dello schermo
Test the iPhone X screen before tearing down. Run function test – Display; Touch; 3D Touch and Swipe-up. All going well.
Rimozione della lunetta
Place the OLED Screen Assembly on the Heat Platform. Remove bezel slowly with Pry Piece and Glue Cleaner. Cut a plastic horn of the bezel with the blade if necessary and then remove bezel with Pry Piece and Glue Cleaner carefully. Be careful with flex cables when removing bezel in the flex cable area.
The Pry Piece accidentally damages flex cables when removing the bezel. Which may result in the abnormal display. Test the screen again. Run function test – Display; Touch; 3D Touch and Swipe-up. Touch, 3D Touch, and Swipe-up work normally while there are two vertical lines on the display.
Separazione del vetro
Posizionare il gruppo dello schermo OLED sulla piastra riscaldante. Separare il vetro dall'OLED utilizzando il filo da taglio. Stiamo lavorando con uno schermo flessibile OLED, quindi fare attenzione con il lavoro manuale.
Test again after separating. Run function test- Display; Touch; 3D Touch and Swipe-up. Touch, 3D Touch, and Swipe-up work normally while there are two vertical lines on the display.
Rimozione della colla
La rimozione della colla per lo schermo di iPhone X può essere eseguita strappandola a mano.
3D Touch Layer Removing
Different from Samsung smartphones, iPhone X has its 3D Touch module adhered to OLED backplane. Different from all iPhone previous versions, the 3D Touch module of iPhone X is bonded to the OLED panel. To fully analyze its structure, we take a disruptive disassembly of the 3D Touch module. The 3D Touch and TP flex bonding is separated completely after the disassembly.
English 
Español 
Français 
Deutsch 
Italiano