Features:
1. Two molds for iPhone 5/5C/5S/6/6+/6S/6S+ LCD
2. Apply molds to avoid LCD damage
3. Easy to operate with the rolling driver and molds
4. Suit for different types of LCD
5. Remove the POL film/ LCD glue with no residual
6. Low technical requirements
7. Apply molds to improve efficiency
Operation with mold
Step1 Preheat the machine to 180 centigrade and put the LCD in the mold
Step2 Place the mold with LCD on the plate
Step3 Lower the razor blade on the middle of the LCD
Step4 Roll the driver to remove the glue until the end of LCD
Step5 Turn to the other side
Step6 Remove the remaining glue
Operation without mold
Step1 Preheat the machine to 180 centigrade and put the LCD on the plate directly
Step2 Lower the razor blade on the top of the LCD. Notice that cut an open at the top of LCD with razor blade would be better.
Step3 Roll the driver to remove the glue, leave about 1mm residual for manually removing.